Remove the broken spoke. Thread FiberFix Spoke a few turns into the spoke nipple. Not too far, 3 or 4 turns only. An extra spoke nipple is provided, if it is necessary.Loop the Kevlar cord in a nice even line down to the old spoke hole in the hub flange, then back up to the cam near the spoke nipple.Thread the Kevlar cord through the cam as shown in the illustration. Give it a few quick tugs to cinch it down firmly. If you are not able to remove the broken spoke, tie off the broken spoke as shown to the right.

What To Do If You Break a Spoke

No Frame

Correctly Installed FiberFix

fast fast bike.jpg

FibFix Spoke

This Site Was Created Using . Create Your Own Site for Free >>Start